Edge-lighting 2 Circuit Straight Rail Manual de usuario descargar pdf (Pagina 2)

STRAIGHT

CONDUCTIVE

CONNECTOR

1/16 ALLEN

WRENCH

STRAIGHT ISOLATING

CONNECTOR

#6-32 SET SCREW

Joining Monorail 2 Circuit Sections

with Straight Isolating Connectors

1: Push the straight isolating connectors completely into one

Monorail 2 Circuit section end and push the other Monorail 2

Circuit section entirely onto the straight isolating connectors.

2: Tighten the #6-32 set screw on each of the isolating

connectors firmly with the 1/16 Allen wrench. Do not over

tighten the set screws as this may strip the threads.

1: Push the straight conductive connectors completely into the

end of one Monorail 2 Circuit section.

2: Push the other Monorail 2 Circuit section entirely onto the

straight conductive connectors.

Joining Monorail 2 Circuit Sections

with Conductive Conductive Connectors

1 2

Sin comentarios

Edge-lighting 2 Circuit Straight Rail Manual de usuario Pagina 2