Edge-lighting 17 Port Linear Canopies Manual de usuario

Busca en linea o descarga Manual de usuario para Encendiendo Edge-lighting 17 Port Linear Canopies. Edge Lighting 17 Port Linear Canopies User Manual Manual de usuario

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 2
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 0
SAVE THESE INSTRUCTIONS!
FJP-33RE-_-20W-_
- This product is dimmable with a low voltage electronic
dimmer.
- This product can be installed to a 4" electrical box with
round plaster ring, or to an octagon electrical box.
Installation Instructions for 14 or 17 Port Rectangle Fast Jack Canopy
904-FJP-33RE-01
IMPORTANT INFORMATION
1718 W. Fullerton Ave
Chicago, IL 60614
Tel: 773-770-1195
Fax: 773-935-5613
www.edgelighting.com
© 2011 Edge Lighting. All Rights Reserved.
Install the Canopy
A
1: Remove the fourteen #8-32 screws around the canopy to
remove the mounting plate.
Install the Canopy
MOUNTING PLATE
CANOPY
2:
Align the mounting plate slots with the electrical box holes
and secure it to the electrical box holes with the provided
two #8-32 screws.
Feed the power wires through mounting plate center hole.
3:
4: Tap the anchors through the mounting plate holes onto the
marked point up to the threaded portion with a hammer.
5: Screw in the threaded portion of the anchors with a Phillips
screwdriver.
B
MOUNTING PLATE
#8-32 SCREW
3
2
3
C
#8-32 SCREW
1
1
1
NOTE: It is recommended that a person to hold the mounting
plate while the electrician installs it.
NOTE: All 4 anchors must be installed to balance the pendants
weight.
MOUNTING PLATE
ANCHOR
4
5
Vista de pagina 0
1 2

Indice de contenidos

Pagina 1 - Install the Canopy

SAVE THESE INSTRUCTIONS!FJP-33RE-_-20W-_- This product is dimmable with a low voltage electronic dimmer.- This product can be installed to a 4"

Pagina 2

D6: Secure the mounting plate to the anchors with the provided #8 screws and washers.WASHER7: Make sure that the mounting plate is grounded in

Comentarios a estos manuales

Sin comentarios