Edge-lighting K2 LED Manual de usuario descargar pdf

FJ-K2-12-SN

Installation Instructions for Fast Jack K2 LED Pendant

904-FJ-K2-01

1718 W. Fullerton Ave

Chicago, IL 60614

Tel: 773-770-1195

Fax: 773-935-5613

www.edgelighting.com

[email protected]

Adjust the Fixture Height

1: Cut the coaxial cable to the desired height (H) with a sharp

cutter. The overall fixture height is measured from the

bottom of the metal shade to the end of the coaxial cable.

M4 SET SCREW

M3 SET

SCREW

1.5MM ALLEN

WRENCH

2MM ALLEN

WRENCH

COAXIAL FIXTURE CONNECTOR

2: Loosen the M4 set screw on base of the coaxial fixture

connector with the 2mm Allen wrench provided. Do not

remove this set screw.

3: Remove the M3 set screw on tip of the connector with the

1.5mm Allen wrench provided.

METAL SHADE

COAXIAL CABLE

SAVE THESE INSTRUCTIONS!

- This product is ETL listed for indoor dry locations.

- The product is intended to be used with Edge Lighting

Monorail systems only.

IMPORTANT INFORMATION

CONICAL NIPPLE

STRAIN RELIEF TUBE

COAXIAL CABLE

4: Feed the coaxial cable through the conical nipple and flared

side of the strain relief tube. Slide the conical nipple and

strain relief tube down the coaxial cable.

COAXIAL CABLE

5: Feed the coaxial cable into the coaxial fixture connector. The

coaxial cable will come to a stop point.

1 2

Indice de contenidos

Pagina 1 - Fast Jack K2 LED Pendant

FJ-K2-12-SNInstallation Instructions for Fast Jack K2 LED Pendant904-FJ-K2-011718 W. Fullerton AveChicago, IL 60614Tel: 773-770-1195Fax: 773-935-5613w

Pagina 2 - CIRCUIT #2

2 9: Push the strain relief tube completely into the coaxial fixture connector. Make sure the slot on the strain relief tube is not inlin

Comentarios a estos manuales

Sin comentarios

Edge-lighting K2 LED Manual de usuario

Busca en linea o descarga Manual de usuario para Encendiendo Edge-lighting K2 LED. Edge Lighting K2 LED User Manual Manual de usuario

Indice de contenidos

Comentarios a estos manuales

Relacionado con productos y manuales para Encendiendo Edge-lighting K2 LED