Edge-lighting Cube-O LED Manual de usuario descargar pdf (Pagina 4)

M3 SET SCREW

BACKPLATE

19: Align the fixture housing to the backplate (Make sure the

set screw is on top) and push it completely in.

20: Tighten the M3 set screw on the fixture housing with the

1.5 MM Allen wrench to secure in place.

SOCKET

21: Push the lamp pins completely into the socket holes.

CAUTION:

To reduce risk of a burn or electrical shock during

lamping, disconnect the power to the fixture.

Use MAX 60 Watt Type T4, G9 Base, Bi-Pin

Halogen Lamp.

NOTE: Use only fingers and a soft cloth to install the lamps.

LAMP

22: Align the slots on the glass shade ring with the socket

housing plate tabs. Replace and rotate the glass shade to

lock it in place.

23: For installation in wet location, caulk around the fixture

fixture canopy with waterproof construction sealant.

FIXTURE HOUSING

GLASS SHADE RING

TAB

SLOT

2.5MM ALLEN

WRENCH

M5 SCREW

SOCKET HOUSING PLATE

SOCKET PLATE

18: Push the socket housing plate slots onto the M5 screws and

tighten them with the 2.5mm Allen wrench.

1 2 3 4

Sin comentarios

Edge-lighting Cube-O LED Manual de usuario Pagina 4