Edge-lighting Alps Manual de usuario descargar pdf

FJ-ALPS-_

Installation Instructions for Fast Jack Alps Pendant

904-FJ-ALPS-01

1718 W. Fullerton Ave

Chicago, IL 60614

Tel: 773-770-1195

Fax: 773-935-5613

www.edgelighting.com

[email protected]

SAVE THESE INSTRUCTIONS!

- This product is ETL listed for indoor dry locations and

approved to be used at any height above the finished

floor.

IMPORTANT INFORMATION

IMPORTANT SAFETY INSTRUCTIONS

To reduce the risk of fire, electrical shock, exposure to

excessive UV radiation, or injury to persons:

- Use this fixture indoors only.

- Do not look directly at the lamp while the fixture is on.

- RISK OF FIRE: Use only the type of lamp and maximum

wattage indicated in this instruction manual.

- Never cover the halogen lamp with anything other than a

lamp shield provided by Edge Lighting and never place

flammable material close to the fixture.

- Never turn the fixture on and off by connecting and

disconnecting the halogen lamp.

- Do not touch the fixture head, shade or lamp shield while

the fixture is on. These surfaces may be VERY HOT.

- Do not touch lamp at anytime. Use a soft cloth instead as oil

from skin may damage lamp.

- It is normal for a new halogen lamp to produce minor

smoke when first turned on.

- Do not operate the luminaire with a missing or damaged

shield.

- Turn power off and allow to cool before replacing lamp.

Adjust the Fixture Height

1: Cut the coaxial cable to the desired height (H) with a sharp

cutter. The overall fixture height is measured from the

bottom of the glass shade to the end of the coaxial cable.

M4 SET SCREW

M3 SET

SCREW

1.5MM ALLEN

WRENCH

2MM ALLEN

WRENCH

COAXIAL FIXTURE CONNECTOR

2: Loosen the M4 set screw on base of the coaxial fixture

connector with the 2mm Allen wrench provided. Do not

remove this set screw.

3: Remove the M3 set screw on tip of the connector with the

1.5mm Allen wrench provided.

GLASS SHADE

COAXIAL CABLE

1 2 3 4

Indice de contenidos

Pagina 1 - Fast Jack Alps Pendant

FJ-ALPS-_Installation Instructions for Fast Jack Alps Pendant904-FJ-ALPS-011718 W. Fullerton AveChicago, IL 60614Tel: 773-770-1195Fax: 773-935-5613www

Pagina 2

2CCONICAL NIPPLESTRAIN RELIEF TUBECOAXIAL CABLE44: Feed the coaxial cable through the conical nipple and flared side of the strain relief tube. Sl

Pagina 3 - Replacing the Lamp

312N12N1111121211: Use fingers to tighten the Fast Jack fixture connector into the Fast Jack system connector (Monorail, Monorail 2 Circui

Pagina 4

4JUse MAX 35 Watt, Type Bi-Pin Halogen Lamp.4: Push the new lamp pins completely into the socket holes.NOTE: Use a soft cloth and fingers to install t

Comentarios a estos manuales

Sin comentarios

Edge-lighting Alps Manual de usuario

Busca en linea o descarga Manual de usuario para Encendiendo Edge-lighting Alps. Edge Lighting Alps User Manual Manual de usuario

Indice de contenidos

Comentarios a estos manuales

Relacionado con productos y manuales para Encendiendo Edge-lighting Alps